Under reasonable weather conditions, film will dry flat with no blisters within 30 days when viewed under normal viewing conditions. Normal viewing conditions are viewing treated windows from a distance of ten feet from the room side, looking at a clear or uniformly overcast sky. Since a particle-free application isn’t possible, there may be small …
What is the curing/drying time after the film has been installed? Read More »
Yes, most of our films can be installed onto Plexiglas or Polycarbonate sheets. Unlike glass or mirror, Plexiglas expands and contracts by temperature and also emits gasses. This may cause many small air bubbles between glass surface and film as time goes on, causing the film to appear wrinkled or blistered.
All of our films are very durable, however care still should be taken not to scrape or gouge films.
Yes, both adhesive and static cling films can be installed in humid and moist conditions.If being installed on a shower door, mounting on the outside of the shower door is recommended.
Always on the inside if possible. The films will stick to the outside, but the life of the films will be reduced due to weathering if installed on the exterior side (exposed to the elements).
Basically, you will need tools to clean the glass, cut the film, squeegee the film and spray the soap and water solution.
Yes, you can.
Peel away the film from one corner and pull the film from the glass. If any adhesive remains on the glass it can easily be removed with a spray of soapy water and a single edge razorblade.
Yes, you can remove frost material.
We have both frosted film with air release and without air release.
