FAQ APA Truck

The curtain must be washed with non-aggressive detergents (no solvents or steam washes 100°C) and put much attention to the use of the pressure pistol: an insistent water jet exerted on the borders of the vinyl could create detachments and compromise the adhesion of the decoration. We recommend that you communicate these cleaning instructions of the […]

Never use a hairdryer, detergents, never heat the lamination during the application phase. Do not use rough sponges and cloths, abrasive creams or very strong solvents.

Yes, you can cut it using a regular plotter. We offer colors plotter vinyl and printable vinyl; both can be cut using your plotter.

In case small bubbles form due to an incorrect application, you can try to make very small holes on the bubbles. For large bubbles, you will have to remove and redo the graphics.

We recommend to use a soft with felt. Our Green Soft squeegee with the microfiber lime buffer is a perfect fit for these installations.

The application to partially or totally cover a sheet is identical. In any case, it is necessary to check the surface state of the cloth so that it is uniform and regular.

Graphics sticking in the wrong places is prevented by applying the correct method of application (hinge method), experience and precision.

Only proper application can prevent wrinkles and blisters. The application techniques are the same, however it must always be kept in mind that the material is softer than a normal cast, so use extra caution and work at a temperature no higher than 28 degrees. The material must always be applied on a clean sheet

The truck can only be applied to a regular and flat sheet, not to straps or reinforcements that would alter its thickness, causing possible detachment and water infiltration.

With the APA Truck vinyl for digital print it is necessary to pay much attention to the drying process of the solvents contained in the inks, as their presence could compromise the adhesion of the decoration. Before laminating the printed material with transparent vinyl L/281 or L291 (and in any case before applying the printed